 The Polyform Norway CC2 can be used as a mooring buoy, an anchor marker buoy or a spar buoy.
- Flexible central tube for chain or pole.
- Moulded seamless construction.
Size 21" diam x 23" High (54cm x 59cm)
Buoyancy 100kgs
Tube Diameter 2" diam (4.8cm)
Colours available
| Polyform US - CC Series Mooring Buoys |
 |
When using the CC Series as a mooring buoy following these simple instructions will achieve the maximum use and durability of the product.
- The CC Series has a flexible centre tube and you must first insert a rigid PVC or aluminium pipe into it. DO NOT inflate the buoy until you have inserted the pipe.
- For easy insertion lubricate both the tube and the pipe prior to inserting. Make the pipe long enough to have about 8 cm extending beyond both the top and the bottom of the buoy.
-
Insert an appropriately sized pin for your load through the chain and the top of the pipe.
-
Attach a moused shackle to the chain at the bottom of the buoy.
(moused shackle means fixing a wire or cable tie through the eye of the shackle pin and then onto the shackle to ensure the shackle remains firmly secured).
-
Attach the mooring or anchor chain from the sea bed to the shackle.
-
Attach the mooring line, with a thimble in the end onto the same shackle.
You can now be confident that your boat is securely moored to the ground tackle and not just to the buoy.
|
|
