Err

How to Videos


Compass Marine Helpful Hints
Click on any of these titles to see our help and advice

Flags

Which size flag and flagpole Do I need? 

Lines & Ropes

Measuring For Mooring Lines

Dock Fendering

Fitting Dock Bumpers

Mooring Buoys


Using Buoys for Mooring

Using Rod Buoys for Mooring




 Majoni valve    

Replacing a Majoni Valve

All our Majoni valves are tested before they leave us but on the odd occasion they fail.  In this situation please let us know and we will send you a shiny new valve and simply watch our handy video to see how to change it




 Polyform Norway Polyform norway A Series   

Inflating Polyform Norway Fenders

Polyform Norway fenders are really easy to inflate using a simple screw in adaptor.  You can use this with any airline, bicycle pump or any pump with a Schrader valve.




 
 Compass Marine Standard Boat Fender Covers   
STANDARD LONG FENDERS

For made to measure covers for standard fenders we will need -

1. The length of cover required - measure one side of your fender from where the eye joins the body of the fender to the same point of the other end, following the contours of the fender.
2. The circumference - measure right around the middle of the fattest part of the fender.


 Compass Marine Single Eye Boat Fender Covers          

   SINGLE EYE LONG FENDERS

   For made to measure covers for single eye fenders we will need -

   1. The length of cover required - measure one side of your fender from where  the eye joins the body of the fender to the mid point at the bottom of the fender following the contours of the fender.
   2.
The circumference - measure right around the middle of the fattest part of the fender

   Please note single eye fender covers with still have a drawstring closure at the bottom.



 

Compass Marine Round Boat Fender Covers 
ROUND FENDERS

For made to measure covers for round fenders we will need -

1. The long circumference - measure from where the eye joins the body of the fender, all the way round, underneath the bottom and back up the other side  to where the eye joins the body of the fender.
2.
The circumference (measure right around the middle of the fattest part of the fender).

Please note, round covers have a drawstring top and bottom




 Compass Marine Centre Hole Boat Fender Covers    

HOLE THROUGH MIDDLE FENDERS

For made to measure covers for hole through middle fenders we will need -

1. The length of cover required - measure from just short of the hole, round the curve to just short of    the hole the other end. 

2. The circumference (measure right round the middle of the fattest part of the fender).