| | |
Manufactured exclusively by Compass Marine the PG5 is the heaviest duty of the extrusions due to being made to thicker gauge than other profiles available.
Size 1.850m (6 feet). Extruded Vinyl pontoon fender.
Easy to fit with self tapping screws. This fender can be cut down as required. | | |
| | | | The ultimate protection for your dock or quay! The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.
Size - 110cm long x 24cm wide x 24cm deep
Number of fixing points - 8 - will take up to 10mm screws or bolts with washers.
Now available in White, Navy & Black
| | |
|
| | | The ultimate protection for your dock or quay! The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.
Size - 100cm long x 19cm x 19cm wide
Number of fixing points - 6 - will take up to 10mm screws or bolts with washers
Now available in White, Navy & Black
| | |
| | | |
Probably our most versatile dock bumper! The ends of this fender can be straight or bend to 90 degrees to protect corners.
Size - 1m Long x 12cms High x 7cms Deep
Number of fixing points - 8 - will take up to 10mm screws or bolts with washers
| | |
|
| | |
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.
The sturdy bracket constructed from reinforced nylon and the wheel itself comes ready inflated.
Size – 30cm diameter x 15cm high
Colour – White
Please note this wheel will ONLY fit pontoons that have sharp, right angled corners, they will not fit rounded corner pontoons.
| | |
| | | |
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.
Size – 30cm diameter x 15cm high
Colour – White
| | |
|
| | |
Size 50cm long x 12cm wide x 7cm deep
Number of fixing points 6 - will take up to 10mm screws or bolts with washers
RRP £25.99
| | |
| | | |
A moulded corner fender with ribs built in to disperse the shock of impact along the whole fender.
31cm x 10cm x 7cm
Now available in White, Navy & Black
| | |
|
| | |
A straight PVC fender with ribs built in to disperse the shock of impact along the whole fender.
50cm x 10cm x 7cm
Now available in White, Navy & Black
| | |
| | | |
When only something small is needed! A straight, moulded PVC pontoon fender.
25cm long x 10cm high x 7cm deep.
Now available in White, Navy & Black
| | |
|
| | |
Size 3.048m (10 feet). Extruded Vinyl pontoon fender. 75mm total drop x 47.6mm width x 25mm top lip x 19.04mm lower lip.
Easy to fit with self tapping screws. This fender can be cut down as required.
| | |
| | | |
Size 1.828m (6 feet). Extruded Vinyl pontoon fender. 82.55mm drop x 38.09mm
Easy to fit with self tapping screws. This fender can be cut down as required.
| | |
|
| | |
Size 12"x 4" (30x10cms)
Hole size .59" (1.5cm)
Suitable for boats up to 3m (10ft)
With freeboard from 41cm (16in) unless fitted horizontally.
| | |
| | | |
Size 17" x 6" (43x15cms)
Hole size .59" (1.5cm)
Suitable for boats up to 5.5m (18ft)
With freeboard from 49cm (19in) unless fitted horizontally. | | |
|
| | |
Size 22" x 8" (55x20cms)
Hole size .59" (1.5cm)
Suitable for boats up to 8.5m (28ft)
With freeboard from 59cm (23in) unless fitted horizontally. | | |
| | | |
Size 27" x 10" (68x25cms)
Hole size .59" (1.5cm)
Suitable for boats up to 10.5m (35ft)
With freeboard from 77cm (30in) unless fitted horizontally.
WHITE ARE OUT OF STOCK
| | |
|
| | |
Size 32" x 12" (80x30cms)
Hole size .59" (1.5cm)
Suitable for boats up to18m (60ft)
With freeboard from 95cm (37in) unless fitted horizontally. | | |
| | | |
Size 15.5"x 6.3" (39.4x16.2cms)
Hole Diameter 5/8" (1.59cms)
Suitable for boats up to 8.5m
With freeboard from 47cm unless fitted horizontally.
| | |
|
| | |
Size 20.5"x 8.5" (52.07x21.6cms)
Hole Diameter 5/8" (1.59cms)
Suitable for boats up to 8.5m
With freeboard from 59cm unless fitted horizontally.
| | |
| | | |
Size 34.8"x 13.5" (88.4x34.2cms)
Hole Diameter 5/8" (1.59cms)
Suitable for boats up to 18m
With freeboard from 95cm unless fitted horizontally.
This size can be used as a dinghy roller.
| | |
|
