Err

Boat Fender Shop
Search Your Cart

Dock & Quay Fendering

The type of dock fendering you will choose depends upon where your mooring is, the level of protection required and budget.
 
OUT OF STOCK
PG5 Heavy Duty Dock Extrusion
Manufactured exclusively by Compass Marine the PG5 is the heaviest duty of the extrusions due to being made to thicker gauge than other profiles available.

Size 1.850m (6 feet).  
Extruded Vinyl pontoon fender. 
 
Easy to fit with self tapping screws. This fender can be cut down as required.
£49.99
Large 3/4 Dock Bumper
The ultimate protection for your dock or quay!  The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.  

Size  -  110cm long x 24cm wide x 24cm deep
 
Number of fixing points  -  8 - will take up to 10mm screws or bolts with washers.

Now available in WhiteNavy Black

 

£59.99
 Articulated Corner Dock Bumper
The ultimate protection for your dock or quay!  The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.  

Size  -  100cm long x 19cm x 19cm wide
 
Number of fixing points  -   6 - will take up to 10mm screws or bolts with washers

Now available in WhiteNavy Black

 



£49.99
Majoni 1m Corner or Straight Dock Bumper
Probably our most versatile dock bumper!  The ends of this fender can be straight or bend to 90 degrees to protect corners.

Size  - 1m L
ong x 12cms High x 7cms Deep

Number of fixing points  -  8 - will take up to 10mm screws or bolts with washers
 

 
£41.50
Majoni Dock Wheel
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.

The sturdy bracket constructed from reinforced nylon and the wheel itself comes ready inflated.

Size – 30cm diameter x 15cm high
Colour – White

Please note this wheel will ONLY fit pontoons that have sharp, right angled corners, they will not fit rounded corner pontoons.

£93.99
Majoni Dock Wheel without Bracket
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.

Size – 30cm diameter x 15cm high
Colour – White

£22.99
Majoni  Small 1/2 Dock Bumper
Size 50cm long x 12cm wide  x 7cm deep
 
Number of fixing points 6 - will take up to 10mm screws or bolts with washers
 
RRP £25.99


 
£27.99
Majoni PG1 Pontoon Corner Fender - 31cm x 10cm x 7cm
A moulded corner fender with ribs built in to disperse the shock of impact along the whole fender.
31cm x 10cm x 7cm

Now available in White, Navy & Black

 
 
 
£19.99
Majoni PG2 Pontoon Straight Fender - 50cm x 10cm x 7cm
A straight PVC fender with ribs built in to disperse the shock of impact along the whole fender.
50cm x 10cm x 7cm
 
Now available in WhiteNavy Black
 
£19.99
Majoni Mini Quay Fender - 25cm L x 10cm H x 7cm D.
 When only something small is needed!  A straight, moulded  PVC pontoon fender.

 25cm long x 10cm high x 7cm deep.
 
Now available in WhiteNavy & Black


£4.99
Compass Marine PG3 Pontoon Fender
Size 3.048m (10 feet).  Extruded Vinyl pontoon fender. 75mm total drop x 47.6mm width  x 25mm top lip x 19.04mm lower lip.
 
Easy to fit with self tapping screws. This fender can be cut down as required.




£64.99
Compass Marine PG4 Pontoon  Fender
Size 1.828m (6 feet).  Extruded Vinyl pontoon fender. 82.55mm drop x 38.09mm
 
Easy to fit with self tapping screws. This fender can be cut down as required.
 
£64.99
Majoni Centre Hole Fender 01 - 12"x 4" (30x10cms)
Size 12"x 4" (30x10cms)
Hole size .59" (1.5cm)
 
Suitable for boats up to 3m (10ft)
With freeboard from 41cm (16in) unless fitted horizontally.

£11.99
Majoni Centre Hole Fender 02 - 17" x 6" (43x15cms)
Size 17" x 6" (43x15cms)
Hole size .59" (1.5cm)
 
Suitable for boats up to 5.5m (18ft)
With freeboard from 49cm (19in) unless fitted horizontally.
£15.99
Majoni Centre Hole Fender 03 - 22" x 8" (55x20cms)
Size 22" x 8" (55x20cms)
Hole size .59" (1.5cm)

Suitable for boats up to 8.5m (28ft)
With freeboard from 59cm (23in) unless fitted horizontally.
£24.99
Majoni Centre Hole Fender 04 - 27" x 10" (68x25cms)
Size 27" x 10" (68x25cms)
Hole size .59" (1.5cm)

Suitable for boats up to 10.5m (35ft)
With freeboard from 77cm (30in) unless fitted horizontally.
£35.99
Majoni Centre Hole Fender 05 - 32" x 12" (80x30cms)
Size 32" x 12" (80x30cms)
Hole size .59" (1.5cm)
 
Suitable for boats up to18m (60ft)
With freeboard from 95cm (37in) unless fitted horizontally.
£46.99
Polyform US HTM Series - HTM 1 - 5.5"x 6.3" (39.4x16.2cms)


Size 15.5"x 6.3" (39.4x16.2cms)
Hole Diameter 5/8" (1.59cms)
 
Suitable for boats up to 8.5m
With freeboard from 47cm unless fitted horizontally.
£34.99
Polyform US HTM Series HTM 2 - 20.5"x 8.5" (52.07x21.6cms)

Size
20.5"x 8.5" (52.07x21.6cms)
Hole Diameter 5/8" (1.59cms)
 
Suitable for boats up to 8.5m
With freeboard from 59cm unless fitted horizontally.

£52.99
Polyform US HTM Series -  HTM 3 - 27"x 10.5" (68.6x26.7cms)
Size 27"x 10.5" (68.6x26.7cms)
Hole Diameter 5/8" (1.59cms)
 
Suitable for boats up to 11.5m
With freeboard from 74cm unless fitted horizontally.
 
This size can be used as a dinghy roller.
£79.99