| | | Dimensions - 33.4"Dia x 41.3"Hgt (85x105cms)
Buoyancy - 314kgs
| | |
| | | | The ultimate protection for your dock or quay! The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.
Size - 110cm long x 24cm wide x 24cm deep
Number of fixing points - 8
RRP £62.88
| | |
|
| | | The ultimate protection for your dock or quay! The 3/4 dock bumpers mean that if you come into your berth without your fenders out you are still protected until you can deploy your fenders.
Size - 100cm long x 19cm x 19cm wide
Number of fixing points - 6
RRP £45.99
| | |
| | | |
Probably our most versatile dock bumper! The ends of this fender can be straight or bend to 90 degrees to protect corners.
Size - 1m Long x 12cms High x 7cms Deep
Number of fixing points - 8
| | |
|
| | |
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.
The sturdy bracket constructed from re-inforced nylon and the wheel itself comes ready inflated.
Size – 30cm diameter x 15cm high
Colour – White
Please note this wheel will ONLY fit pontoons that have sharp, right angled corners, they will not fir rounded corner pontoons.
| | |
| | | |
Designed for a 90 degree pontoon corner, this ingenious device allows your boat to roll past a corner without touching the pontoon.
Size – 30cm diameter x 15cm high
Colour – White
| | |
|
| | |
Size 50cm long x 12cm wide x 7cm deep
Number of fixing points 6
RRP £25.99
| | |
| | | |
A moulded corner fender with ribs built in to disperse the shock of impact along the whole fender.
31cm x 10cm x 7cm
| | |
|
| | |
A straight PVC fender with ribs built in to disperse the shock of impact along the whole fender.
50cm x 10cm x 7cm
| | |
| | | |
When only something small is needed! A straight, moulded PVC pontoon fender.
25cm long x 10cm high x 7cm deep.
| | |
|
| | |
Size 3.048m (10 feet). Extruded Vinyl pontoon fender. 75mm total drop x 47.6mm width x 25mm top lip x 19.04mm lower lip.
Easy to fit with self tapping screws. This fender can be cut down as required.
| | |
| | | |
Size 1.828m (6 feet). Extruded Vinyl pontoon fender. 82.55mm drop x 38.09mm
Easy to fit with self tapping screws. This fender can be cut down as required.
| | |
|
| | |
Size 12"x 4" (30x10cms)
Hole size .59" (1.5cm)
Suitable for boats up to 3m (10ft)
With freeboard from 41cm (16in) unless fitted horizontally.
| | |
| | | |
Size 17" x 6" (43x15cms)
Hole size .59" (1.5cm)
Suitable for boats up to 5.5m (18ft)
With freeboard from 49cm (19in) unless fitted horizontally. | | |
|
| | |
Size 22" x 8" (55x20cms)
Hole size .59" (1.5cm)
Suitable for boats up to 8.5m (28ft)
With freeboard from 59cm (23in) unless fitted horizontally. | | |
| | | |
Size 27" x 10" (68x25cms)
Hole size .59" (1.5cm)
Suitable for boats up to 10.5m (35ft)
With freeboard from 77cm (30in) unless fitted horizontally. | | |
|
| | |
Size 32" x 12" (80x30cms)
Hole size .59" (1.5cm)
Suitable for boats up to18m (60ft)
With freeboard from 95cm (37in) unless fitted horizontally. | | |
| | | |
Size 5.9"Dia x 11.8"Hgt (15x30cms)
| | |
|
| | |
Size 7.08"Dia x 15.3"Hgt (18x39cm)
| | |
| | | | Sometimes known as "Bass boat fenders” these are the perfect solution for low free-board boats, Dories and for protecting the gunwales from pontoons etc.
Fender is 35cm long and the lip is 11cm long.
| | |
|
